NEC NX7700i/5040H-32 - Manual (Page 47)

Base Module
855-900547-200 2-11
2.2.11. DAT Unit
A DAT unit can be mounted on the I/O module in the main or expansion cabinet as optional
equipment.
2.2.11.1. Location of Index Labels
Figure 2-11 shows the location of index labels attached to the digital audio tape.
Figure 2-11 Index Labels on the Digital Audio Tape
2.2.11.2. Notes on Index Labels
(1) Attach index labels properly as shown in 2.2.11.1. Be sure to write the start date on these
labels.
(2) Change the labels when the DAT is used for other purpose. Remove the old labels before
attaching the new labels.
(3) When using index labels other than those supplied by NEC, make sure that they are in the right
size and easy to remove without remnant paste.
2.2.11.3. Preventing Accidental Erasure of Data
As shown in Figure 2-12, open the write protect slider next to the side label of the cartridge to
prevent data on the DAT from being erased by accident. Write on the DAT is permitted by
closing the write protect slider.
OFD!