NEC NX7700i/5040H-32 - Manual (Page 160)

Operation Procedure
855-900547-200 3-31
3.5.7.7. Setting the Network Boot
To enable PXE Boot, change the EFI Boot Manager using the EFI Boot Option Maintenance
menu. This section explains how to change the EFI Boot Manager with an example of changing
the network installation menu for HP-UX.
Before change: Example) Immediately after HP-UX is installed.
EFI Boot Manager ver 1.10 [14.62]
Please select a boot option
HP-UX Primary Boot: 8/0/7/2/0.8.0.255.1.0.7
Acpi(PNP0A03,0)/Pci(2|1)/Ata(Secondary,Master)
EFI Shell [Built-in]
Boot option maintenance menu
EFI System Configuration Menu
Use the arrow keys to change settings.
Before change
After change: After the menu is changed.
EFI Boot Manager ver 1.10 [14.62]
Please select a boot option
HP-UX Primary Boot: 8/0/7/2/0.8.0.255.1.0.7
Acpi(PNP0A03,0)/Pci(2|1)/Ata(Secondary,Master)
Acpi(PNP0A03,0)/Pci(3|0)/Mac(00004C717743)
EFI Shell [Built-in]
Boot option maintenance menu
EFI System Configuration Menu
Use the arrow keys to change settings.
After change