NEC NX7700i/5040H-32 - Manual (Page 136)

Operation Procedure
855-900547-200 3-7
2) Example of SP console screen during system startup
Note: When multiple partitions are defined, a particular partition can be selected by
entering its partition number instead of entering “all.”
iSPyz:---> up <= Enter up and press Enter
This command will bring up the specified partition.
Enter partition number (0-7/all/CR=exit) : all <= Enter all and press Enter
Execute OK? (y/[n]) y <= Enter ｙ and press Enter
UP command was accepted. All partitions will run soon.
[iSPyz:INFO.ccc] partition 0 : turning on POWBAY(s)...
[iSPyz:INFO.ccc] partition 0 : turning on XBX_C(s)...
[iSP0m:INFO.ccc] XBX00 SD completed normally.
[iSP0m:INFO.ccc] XBX01 SD completed normally.
：
[iSPyz:INFO.ccc] partition 0 : turning on PCI_BAY(s)...
[iSP0m:INFO.ccc] IOX00 SD completed normally.
:
[iSP0m:INFO.ccc] partition 0 : turning on CELL(s)...
[iSP0m:INFO.ccc] MMX00 SD completed normally.
:
>> SP LOG MESSAGE START (07:6L) <<
11/28/2005 11:31:18 0------- System initialization completed. (SPFW:R00.35)
>> SP LOG MESSAGE END <<
[iSP0m:INFO.ccc] partition 0 : handed off the control to BIOS.
(DIPSW = 00000000)