NEC NX7700i/5040H-32 - Manual (Page 33)

System Overview
855-900547-200 1-7
Table 1-1 Base Module Specifications (Cont’d)
Expansion Cabinet
I/O ENCLOSURE (up to 2 I/O enclosures can be installed in the cabinet)
I/O MODULE (up to 4 I/O modules can be installed in the cabinet)
Max. No. of PCI slots 64 slots (133MHz)
Max. I/O bandwidth 67GB/s
DVD-ROM unit
One unit can be installed in each I/O module (up to 4 units in
the cabinet)
DVD-ROM/CD-ROM mode selection
DAT unit
One unit can be installed in each I/O module (up to 4 units in
the cabinet)
DDS-4 4mm DAT unit
Magnetic disk unit
Up to 4 units can be installed in each I/O module (two units
when DAT is used)
(Up to 16 units can be installed in the cabinet.)
Selection from 73GB/146GB/300GB
POWER BAY (up to 2 units can be installed in the cabinet)
* The power bay is not installed in some expansion cabinet.
DPS (up to 6 units can be installed)
Expansion Cabinet
Cabinet size/weight
Width 600mm
Height 1800mm
Depth 1050mm (1070mm including the rear door handle)
Weight (in max. configuration) 330kg
Power supply
Voltage Single-phase, 200 to 240V
±10%
Frequency 50/60Hz
±1Hz
Power consumption 1.9kVA
Environmental conditions
Temperature
Operating
Storage
+5
°C to +32°C
+5
°C to +45°C
Humidity
Operating
Storage
20% to 80% (no condensation)
8% to 80% (no condensation)