NEC NX7700i/5040H-32 - Manual (Page 83)

Base Module
855-900547-200 2-47
2.4.6.6. FV (Firmware Versions)
m b u
X X X
* Always valid without regard to the current system status.
Function:
This command is used to show version information for the iSPFW and BIOS.
This command also provides checksum test on the FW storage areas.
Note that, in a duplicated iSP environment, information is managed separately for each of the
duplicated iSPs.
Also the display information may slightly change from one SPFW version to another.
(Screen Example)
Description
No.
iSPyz:---> fv <ENTER>
Firmware Versions : (currently running firmware is Rxx.xx)
iSP BOOT (*) : xx.xx generated on mm/dd/yyyy hh:mm:ss
iSP FW bank (*) : xx.xx generated on mm/dd/yyyy hh:mm:ss
BIOS bank0 (012 ) : xx.xx generated on mm/dd/yyyy hh:mm:ss
BIOS bank1 ( 345 ) : xx.xx generated on mm/dd/yyyy hh:mm:ss
BIOS bank2 ( 67) : xx.xx generated on mm/dd/yyyy hh:mm:ss
(a)
Do you want to check the flash memory? (y/[n]) : y <ENTER> (b)
checking iSP BOOT bank...
passed.
checking iSP FW bank...
passed.
checking BIOS bank0...
passed.
checking BIOS bank1...
passed.
checking BIOS bank2...
passed.
(c)
FV command terminated.
(Description)
Description
No.
Description
(a) Lists the current states of the FW storage areas.
(b) If a checksum test on the FW storage area is needed, enter “y.”
(c) Lists the results of checksum test.