NEC NX7700i/5040H-32 - Manual (Page 120)

Base Module
855-900547-200 2-84
b) partition boot methods and Hot-plug permission
a) display all settings
Select ? (c/p/b/a/CR=back) :
<ENTER>
Display and modify settings of system and iSP.
s) System settings
i) iSP settings
a) display all settings
Select ? (s/i/a/CR=exit) :
<ENTER>
(Description)
Description
No.
Description
(a)
The Main Menu appears. In the screen example above, option s) System setting
is chosen.
(b)
The Sub-Menu for System Setting opens. Option b) partition boot methods is
chosen here.
(c)
The current setting for partition boot methods appears.
If you wish to change the setting, enter “y.”
(d) Enter values at the prompts.
(e)
The modified parameter settings are listed.
Pressing <ENTER> returns the screen to Sub-Menu.
Screen Example for iSP LAN/Serial Parameter Setting:
Description
No.
iSPyz: MNT> sg <ENTER>
Display and modify settings of system and iSP.
s) System settings
i) iSP settings
a) display all settings
Select ? (s/i/a/CR=exit) :
i <ENTER>
(a)
iSP setting menu:
c) LAN/Serial settings
f) FTP server settings
s) SNMP settings
a) display all settings
Select ? (c/s/f/a/CR=back) :
c <ENTER>
(b)
iSP LAN/Serial console settings :
Console Port
baud rate : 9600 parity : none
data bits : 8 flow control : RTS/CTS
stop bit : 1
LAN
LAN0 IP address : 192.168.100.31
LAN0 subnet mask : 255.255.255.128
(c)