Caution, Handling the lithium battery, Handling the laser products – NEC NX7700i/5040H-32 User Manual

Page 6: Handling the damaged liquid crystal display

Advertising
background image

v

CAUTION

HANDLING THE LITHIUM BATTERY

A lithium battery is used in this unit. Incorrect exchange of the lithium battery

Could result in an explosion. The same type or an equivalent type of the battery

is recommended by the manufacturer. Contact beforehand an authorized NEC

service personnel before exchanging or disposing of the lithium battery.


HANDLING THE LASER PRODUCTS

Class 1 laser product which is complied with JISC6802 ,EN60825 ,IEC825 and FDA

21CFR chapter1, subchapter J is used in this unit.

NOTE: Class 1 laser product is regarded safety emission lebel for the body, stated in

JISC6802 ,EN60825 ,IEC825 and FDA 21CFR .

If there is an adjustment which can affect the laser emission power level,

don’t touch or adjust without authorized NEC service personnel’s permission,

otherwise harmful laser may be emitted and you will be exposed .

This marking is put on this unit.

クラス 1 レ-ザ製品

CLASS 1 LASER PRODUCT PER IEC825

LASER KLASSE 1 NACH IEC825

PRODUCTO LASER DE CLASE 1

Complies with 21CFR chapter 1, Subchapter J

HANDLING THE DAMAGED LIQUID CRYSTAL DISPLAY

A liquid crystal display is used in this unit.

When handling the damaged liquid crystal display, be careful to take care and

avoid exposure of the liquid on the inside of the liquid crystal display.

The liquid can cause bodily harm. In the event the liquid is ingested, gargle at once

and consult a doctor immediately.

If the liquid should come in contact with the skin, or get into the eyes, wash the skin

with cool running water, or flush the eye with cool running water for at least 15 minutes

and consult a doctor.

"HANDLING DISPOSAL OR RECYCLING OF EQUIPMENT

Please let our salesperson or dealer know when discarding or recycling this

unit."

Advertising
This manual is related to the following products: