NEC NX7700i/5040H-32 - Manual (Page 61)

Base Module
855-900547-200 2-25
2.4.3. OS (BIOS) Console
If OS (BIOS) Console is chosen from the iSP Main Menu, I/O to/from the serial controller is
redirected as viewed from the OS (BIOS).
To return to the Main Menu, enter “^B” (press the B key while holding down the CTRL key).
While the OS (BIOS) Console I/O is redirected, the screen displays and operations depend
solely on the BIOS or OS that runs in that partition, and not on the iSPFW.
OS (BIOS) Console redirection is only allowed for the master iSP.
(Screen Example)
Description
No.
iSP MAIN MENU
0) OS(BIOS) serial console of partition#0 (INITIALIZING )
1) OS(BIOS) serial console of partition#1 (RUNNING )
2) OS(BIOS) serial console of partition#2 (STOPPED )
3) OS(BIOS) serial console of partition#3 (FAULT )
4) OS(BIOS) serial console of partition#4 (POWER OFF )
5) OS(BIOS) serial console of partition#5 (RUNNING )
6) OS(BIOS) serial console of partition#6 (NOT CONFIGURED )
7) OS(BIOS) serial console of partition#7 (NOT CONFIGURED )
V) Virtual System Operator Panel
S) iSP commands
E) Exit
DISCONNECTALL) disconnect all console connections
iSPyz> 0 <ENTER> (a)
***** redirection of serial console 0 *****
***** enter CTRL+B to quit *****
(b)
:
:
:
:
:
(c)
<CTRL>+<B> (d)
***** returned from serial console 0 redirection ***** (e)