NEC NX7700i/5040H-32 - Manual (Page 126)

Base Module
855-900547-200 2-90
2.4.6.13. SR (Save System CMOS/NvRAM)
m b u
X
* For cautions for using this command, read the following description of function.
Function:
This command is used to read the contents of the system CMOS/NvRAM and save them to the
FTP Server, or in turn, restore them from FTP Server files.
The target partitions of this command must be in the EFI shell prompt state, with their BIOS
booted up. In any other states, not only the correct system operation is not guaranteed, but the
contents of the system CMOS/NvRAM might be destroyed.
RTC data will not be saved to or restored from the CMOS memory.
(Screen Example)
Description
No.
iSPyz:---> sr <ENTER>
CAUTION: This command MUST be used when target system is in EFI shell
prompting. Otherwise CMOS/NvRAM may be DESTROYED or this command do NOT work
properly.
Enter partition number? (0-7/CR=exit) : 1 <ENTER> (a)
Save of Restore? (s/r/CR=back) : s <ENTER>
getting CMOS/NvRAM from partition 1...
got.
(b)
ERROR: cannot get CMOS/NvRAM from partition 1. Check the state of partition
1.
Enter partition number? (0-7/CR=exit) :
(c)
IP of FTP server [default=10.0.0.2] (CR=skip) : 10.0.0.3 <ENTER>
account [default=necuser] : necuser <ENTER>
password [default=********] : xxxxxxxx <ENTER>
file path : cmossave/cmos1.bin <ENTER>
(d)
Save OK? (y/[n]) : y <ENTER> (e)
connecting... (f)
uploaded.
Enter partition number? (0-7/CR=exit) : 2 <ENTER> (h)
Save or Restore? (s/r/CR=back) : r <ENTER>
IP of FTP server [default=10.0.0.2] (CR=skip) : 10.0.0.3 <ENTER>
account [default=necuser] : necuser <ENTER>
password [default=********] : xxxxxxxx <ENTER>
file path : cmossave/cmos2.bin <ENTER>
Restore OK? (y/[n]) : y <ENTER> (i)
connecting...
connected.
downloaded.
(j)