NEC NX7700i/5040H-32 - Manual (Page 92)

Base Module
855-900547-200 2-56
cmd arg1 arg2 arg3 arg4 Description
- - - - Use this command to manually “DISABLE”
the components that are currently enabled.
If no argument is specified or an argument
has an error, the disable command help
opens.
Online components are unable to be
disabled.
It is not allowed to disable the CELL Card,
XBX Card, PCI Bay, and their
subcomponents when any of the partitions
within the system is booting up, shutting
down, or handling an error. disable
<arg1> <arg2> - - <arg1> and <arg2> are the same as those
for the enable command.
Argument “all” is not allowed for this
command.
- - - - This command is currently not supported.
This command can be used to dynamically
connect currently offline components (CELL,
XBX Card, and PCI Bay) to the system while
the OS is running. It remains invalid while
any of the partitions within the system is
booting up, shutting down, or handling an
error.
The CELL and PCI Bay are functional only if
they are used in online conjunction with the
OS that supports this command function.
If no argument is specified or an argument
has an error, the online command help
opens.
This command is supported on the
32Way(B), 8Way, and ISPF models. It is not
supported on the 32Way(H) model.
cellx - - - Connect CELL Cards to the partition to which
they belong.
A vacant partition to which no CELL or IOX
belongs is needed.
This command is supported on the 32Way(B)
and 8Way models.
xbxcx - - - Connect XBX Cards to the system.
On the 32Way(B) model, XBX Cards need
be connected to the system in pairs: i.e. XBX
Cards 0 and 2 or 1 and 3. A single XBX Card
alone is not accepted.
The XBX Card is not connectable to the
8Way model.
online
xbxc0 portx Connect inter-XBX external interface ports to
the system, to which cabinets are connected.
x: XBX port number (4-5)
This command is supported on the ISPF
system. It is valid when the operating
systems are running (ACPI S0 State) on both
systems.