Oki 5700 - Manual (Page 125)

English
ISDN G4 Board D-3
Registration and Important Settings
Registration
ISDN Country Code*: This number is a terminal identifier (TID). Up to
three numbers (the country code of the country in which the machine is
being operated) can be registered. (Default setting.)
ISDN No.*: This is the national subscriber number for the ISDN. Up to 20
numeric digits can be used. This number is used as a TID and for caller
number information (CLIP) and checking MSN. (Default setting.)
ISDN ID*: This number is a terminal identifier. Up to ten alphabetic
characters (uppercase or lowercase) can be used. (Default setting.)
ISDN SUB: This is the sub-addressing number for directing
communications. Up to 19 numbers can be used.
Please be sure to register the ISDN country code, ISDN number and ISDN
ID into the facsimile machine. If these items are not registered ISDN
service may be denied.
Settings
ISDN Dial Mode (User Setting)
Set to G3: The call originates in G3 mode when dialled from the numeric
keypad. At the time, 3.1kHz analogue transmission is requested to the
network.
Set to G4*: The call originates in G4 mode when dialled from the numeric
keypad. Non-restricted digital transmission is requested to the network.
(Default setting.)
ISDN Dial Mode (Communication Parameter)
Set to G3: The call originates in the G3 mode when dialled from Speed
Dial entry. At the time, 3.1kHz analogue transmission is requested to the
network.
Set to G4*: The call originates in G4 mode when dialled from Speed Dial
entry. Non-restricted digital transmission is requested to the network.
(Default setting.)