Oki 5700 - Manual (Page 20)

English
1-12 Chapter 1
17 START/COPY key: Use this key to initiate transmission of a
document after loading the document and selecting the location, start
manual fax transmission or reception, return the machine to normal
operation from the Power Save mode, or start the copying function.
18 STOP key: Use this key to cancel the operation shown on the display,
cancel the transmission of a fax (press twice within 3sec) or to cancel
an alarm (ALARM indicator light will illuminate). After loading paper
or installing a new toner cartridge or image drum unit, press this key to
cancel the alarm condition. It can also be used to return to higher
operational layers when programming the machine.
19 One-touch keypad latch to second panel (Model B only): Lift this
latch to reveal a second panel of one-touch keys.
20 One-touch keypad: For a detailed description of the One-touch
keypad functions, please refer to the next section.
21 One-touch labels: After programming a telephone number into a One-
touch key, write the name of the location on the label for the One-touch
key. (Remove the plastic covering the label, write the name using a
pencil, and then replace the cover.)
One-Touch Keypad
The one-touch keypad is the facsimile machine’s most convenient tool.
Use these keys for quick, one-touch dialling and programming of other
machine operations. You can also assign telephone numbers (up to 40
digits each) to a one-touch key, and alphanumeric names of up to 15
characters in length.