Oki 5700 - Manual (Page 25)

English
Facsimile Functions 2-3
The programming keys on the left side of the control panel are designed to
provide simple operation of the numerous functions provided by the
machine. The following offers a brief explanation of how to use these
keys.
Menus and Functions
The menu system is like a large table with four columns and many rows.
Each function of your facsimile machine is arranged across one row of the
table. Some functions require all four columns, while others only need two
or three. The MENU/EXIT, ENTER, and the four SHIFT keys (
↑ ↓ → ←)
keys allow navigation up, down and across the table for selecting functions
and their settings.
Each major function category is listed in the left-most column (level 1) of
the table. When you first press the MENU/EXIT key you enter the menu
system at this level. The function category (row) at which you enter
depends on whether or not a document is loaded in the document feeder.
Menu level 1
When first switched on, the machine will wait in standby mode, showing
the time, machine mode and amount of memory available. By pressing
MENU/EXIT, the machine will enter the menu at level 1(Menu mode).
To navigate this layer:
Menu level 2
At this level up/down navigation is only possible within the function
selected at level 1. (To move to a completely different function category
press the
← or STOP key to move back to level 1, and then use the ↑ and
↓ keys to move up or down the menu table to the required function.)
To navigate this level::
↑ or ↓
Move cursor up or down to the desired function;
← or STOP
Return to the standby mode;
ENTER or
→
Enter menu level 2 for the function selected.
↑ or ↓
Move cursor up or down to the desired function;
← or STOP
Return to level 1;
ENTER or
→
Enter level 3 for the function indicated.