Oki 5700 - Manual (Page 83)

English
Customising 6-3
Viewing Current Settings
Before making changes, it is helpful to print out a list of current settings as
an aid to determine features and functions which need to be changed. The
Configuration Report is best for this purpose.
To Print Configuration Report
1 Press MENU/EXIT to enter the menu.
2 Press
↓ to select REPORT PRINT, press ENTER or →.
3 Press
↓ to select CONFIGURATION, press ENTER or →.
4 Report will print out.
5 If print out of report is not required, press STOP.
Operation Functions
Remote Diagnosis
The remote diagnostics feature allows service personnel to remotely dial
and service the machine. Available settings are ON and OFF. Speed access
no. 14.
Transmission (TX) Mode Default
This function allows the machine’s default settings for original document
condition and transmission scanning resolution (TYPE OF ORIGINAL
and RESOLUTION keys, respectively) to be changed. The factory default
settings are standard (STD) and normal (NORMAL). If faxes which
require some other combination are often sent or received, use these
function settings to adjust machine operations to best fit the situation.
During the programming sequence, the new default combination will be
indicated on the control panel. Speed access no. 15.
Memory Full Save
With features like group dialling, “call origination” starts after an entire
document or set of documents is read into memory. If a document memory
overflow occurs the display will prompt whether the documents already
scanned in memory should be sent or deleted. The user then has the choice
of which option is appropriate. If the user makes no response after a short