Oki 5700 - Manual (Page 59)

English
Directories and Basic Operations 4-11
Cancelling Transmission
If there is a need to stop a transmission while still in progress, do the
following:
1 Press the STOP key twice in succession.
2 The display will show “STOPPED”.
3 If a document is stuck partly in the feeder entrance or elsewhere in the
machine, a “RELOAD DOCUMENT” message may be displayed. If
so, press the STOP key one more time. The machine will feed the
document through the process to the document stacker.
Manual Receive Mode
Do the following to receive faxes when the machine is set to TEL:
1 When the machine rings announcing a phone call, pick up the handset
of the external phone. (If a person is on the line, normal voice
communication is possible.)
2 If a signal from a remote facsimile machine is heard or the party wishes
to send a fax after finishing a conversation, press the START key.
3 When the message “Manual RX Start” appears on the display, hang up
the handset.
4 The machine will emit a tone following line disconnection, informing
the transmission status (i.e., successful or unsuccessful tones).
Receiving to Memory
Memory Reception Mode (MEM): When set to MEM, the machine will
automatically receive messages into memory and store them there even
when there is paper loaded for printing. Data stored in memory can be
printed out using the PRINT FROM MEMORY function.
To Print from Memory
1 Press MENU/EXIT to enter the menu.
2 Press
↓
to select PRINT FROM MEMORY, press ENTER or
→
.
3 Press
↓
to select PRINT MEMORY MSG., press ENTER or
→
.
4 If a password is not required, data in memory will be printed out. If a
password is required, enter 4-digit password*, press ENTER.