Oki 5700 - Manual (Page 73)

English
Advanced Operations 5-9
Relay Broadcasting
Relay broadcasting allows one facsimile machine to send a document to
another, which then re-sends (broadcasts) the document to a number of
other locations. Although this machine is capable of initiating a relay
broadcast, it will not function as a key relay station. (Key relay stations
must be compatible models for this function to operate correctly.)
Before sending documents in a relay broadcast operation, the 4-digit relay
password of the relay station and 2-digit identification numbers of the
remote stations (or groups of remote stations) must be obtained. After
making a relay transmission, the key relay station can send a report
confirming the completion of the broadcast. This report is sent to the
location specified by the telephone number programmed in the RELAY
REPORT NO. function. For this machine to receive the report, program its
telephone number as the relay report number.
Initiating a Relay Broadcast
1 Load the document(s).
2 Press MENU/EXIT to enter the menu.
3 Press ↓ to select Relay initiate TX, press Enter or →.
4 Input password (4-digit number) of key relay station, and press
ENTER.
5 Input desired location using the Speed Dial number or numeric keypad,
and press START.
6 The machine will scan the document(s) into memory and begin faxing
to the key relay station.
7 If all memory is used, the machine will offer to send pages scanned so
far.
8 To send scanned pages, press ENTER.
Setting the Relay Report No.
1 Press MENU/EXIT to enter the menu.
2 Press
↓ to select LOCATION PROGRAM, press ENTER or →.
3 Press
↓ to select RELAY REPORT NO., press ENTER or →.