Oki 5700 - Manual (Page 47)

English
Installation 3-19
ISDN Sub No. (optional): The ISDN Sub No. requires the input of 19
numeric digits for the sub address of the machine when in ISDN mode.
Speed access no. 07
To Set Dial, Incoming Call and Other Basic Parameters, as well as MCF
and ISDN G4 Options:
1 Press MENU/EXIT to enter the menu.
2 Input the speed access number of the parameter to be changed, and wait
for the appropriate display prompt.
3 When the display for the desired parameter is shown, press
↑
or
↓
to
select the setting (or input data where required), press ENTER.
4 Press MENU/EXIT to return to standby mode.
5 Repeat steps 1-4 until finished setting parameters.
Connecting to a PBX
Private Branch Exchanges (PBXs) are private telephone systems used to
route calls internally, for example, in a company. When dialling a
telephone number, if a prefix (access) number is required to open an
outside line, the line is connected to a PBX. If this machine is going to be
connected to a PBX, please make the following changes to enable the
machine to recognise the prefix digits in the telephone numbers used to
obtain access to the outside line. After dialling the prefix digits, the
machine will wait until the outside line is available (secondary dial tone
detected) before dialling the rest of the number.
Note:
Service assistance may be required to make changes in some
countries. Also, some PBX systems may require additional
adjustments to the machine. If there is any problem with fax
communications after changing parameters, please contact your
authorised dealer for assistance.
To Set PBX Parameters
1 Press MENU/EXIT to enter the menu.
2 Input speed access no. 50 (PBX LINE), wait the display prompt.
3 Press
↑
or
↓
keys to select ON or OFF setting, press ENTER.
4 Press
↓
to select Dial Prefix, press Enter or
→
. (Dial Prefix can also
be accessed from the main menu by entering its speed access code, 51.)