Oki 5700 - Manual (Page 89)

English
Customising 6-9
Options
Multifunction Peripheral (MFP) PC Interface Kit
The MFP PC Interface Kit is basically a software package that allows your
machine to interface with a computer connected via a parallel data cable.
Once the optional MFP software is installed in the computer and a parallel
data cable attached to connect the two devices, the facsimile can provide
PC Fax, Printer and Scanner operations. (For further details, please see
Appendix B.)
Network Print Kit
The Ethernet Adapter gives your machine the compatibility to operate in
conjunction with a variety of LAN systems and protocols including Novell
and Microsoft. Installation of the NIC enables the option of utilising
Network Print Service; 10-page per minute, 600 dot per inch printing with
Hiper-W print emulation. (For further details, please see Appendix C.)
ISDN G4 Board
The ISDN G4 Board raises the machine operability to ITU-T G4
classification with digital communications at 64Kbit/s. Although PSTN
(public switched telephone network) settings are deactivated when
installed, the system is equipped with a setting to activate an automatic
fallback function that enables communications in either G3 or G4 mode,
depending on the classification of the remote machine. (For further details,
please see Appendix D.)
Expandable Memory
Your facsimile transceiver is equipped with a memory expansion slot
located behind the rear cover. Memory upgrade modules of 2MB and 4MB
are available for those users who require transmission and reception of
large volumes of data.
Contact your supplier for more information.