To set closed network, Power failures and memory, Making copies – Oki 5700 User Manual
Page 61
English
Directories and Basic Operations
4-13
memory. The available settings are limited reception (RX), limited
transmission and reception (TX/RX), and no limitations (OFF). Speed
access no. 21.
To Set Closed Network
1
Press MENU/EXIT to enter the menu.
2
Input speed access no. 21 (Closed Network), wait.
3
When CLOSED NETWORK display appears, press
↑
or
↓
to select
setting, press ENTER.
4
Press MENU/EXIT to return to standby mode.
Power Failures and Memory
Your machine is equipped with a battery to prevent the loss of data stored
in memory at the time of a power outage. The typical memory-backup time
with a fully charged battery is 72 hours. If data is still held in memory at
the time of power restoration, the machine will continue operations from
the point when power was lost (e.g., delayed transmission, redial waiting
conditions, etc. resume from point of power failure). If the data in memory
has been lost at the time of power restoration, the machine will print out a
Power Outage Report. Please refer to the chapter Reports for more
information.
Making Copies
The machine is capable of making up to 99 copies at one time. When
loaded with the recommended paper, the copy stacker capacity is 200 face
down or 10 sheets face up. Documents to be copied will be printed at a
resolution of 600 × 400dpi).