Oki 5700 - Manual (Page 87)

English
Customising 6-7
Restricted Access ID
This is a 4-digit numeric password that is must be input to gain access to
machine operations when the machine is set in the Restrict Access mode.
Up to 24 RESTRICTION ID passwords can be registered at one time.
Speed access no. 05
To Set Restricted Access ID
1 Press MENU/EXIT to enter the menu.
2 Input speed access no. 05, wait.
3 Input department number (1-24), press ENTER.
4 Input 4-digit password(000-999) using numeric keypad, press ENTER.
5 If number is already registered, display will show “ALREADY
EXIST”.
6 Input another 4-digit ID number, press ENTER.
7 Repeat steps 3-6 until all desired ID numbers have been registered.
8 Press MENU/EXIT to return to standby mode.
To Cancel Restricted Access ID
1 Press MENU/EXIT to enter the menu.
2 Input speed access no. 05, wait.
3 Input department number (1-24), press ENTER.
4 Input 4-digit password using numeric keypad, press ENTER.
5 If ID matches registered number, display will show “ID CLOSE?”
If no match with registered number, display will show “INVALID ID”.
6 At “ID CLOSE” press ENTER to confirm ID cancellation.
7 Press MENU/EXIT to return to standby mode.