Oki 5700 - Manual (Page 27)

English
Facsimile Functions 2-5
Accessing Functions
There are two methods for accessing functions: step access and direct
(speed)
access.
Step Access
To access functions in a stepwise manner, the procedure is like that
described for navigating the menu levels. Begin by pressing MENU/EXIT,
and then use the programming keys to locate, enter and set the desired
function.
Speed Access
If the function is assigned a speed access number, typing this number in at
the menu display prompt at level 1 will bring up the setting or registration
display in level 4 for direct access.
Notes:
1 Speed access numbers are only assigned to SETUP
menu functions (level 4.)
2 Speed access can only be initiated from the level 1.
3 Numbers must be entered in 2-digit form (i.e., 00-99)
4 Speed access numbers are set at the factory and cannot
be changed. Some numbers are not available depending
on the country in which a machine was purchased and
whether or not the machine is equipped with the
appropriate option(s).
.
Some of the functions in this list cannot be accessed by the user. If
required, consult your supplier for details.
Table 2-1: Speed access numbers and their assigned functions
00 Clock Adjustment 01 TSI/CSI 02 Sender ID 03 Personal Box
04 Memory Password 05 Restrict ID 06 ISDN TID 07 ISDN Sub. No.
10 Auto Answer Mode 11 Monitor Volume 12 Buzzer Volume 13 User Language
14 Remote Diagnosis 15 TX Mode Default 16 No Toner Memory
Receive 17 Memory Full Save
18 Instant Dial 19 Restrict Access 20 ECM Function 21 Closed Network
22 Toner Save 23 Sender ID 24 1’ST Paper Size 25 2’ND Paper Size
26 Power Save Mode 27 ISDN Dial Mode 28 Speech Receive 40 Redial Tries
41 Redial Interval 42 Auto Start 43 Dial Tone Detect 44 Busy Tone Detect
45 MF/DP 46 Pulse Dial Rate 47 Pulse Make Ratio 48 Pulse Dial Type
49 MF Tone Duration 50 PBX Line 51 Flash/Earth/Normal 52 Dial Prefix
60 Incoming Ring 61 Remote Receive 62 T/F Timer Program 63 Continuous Tone
64 PC/FAX Switch 65 CNG Count 66 Ring Response 67 Distinctive Ring
70 MCF (Single Loc.) 71 MCF (Multiple Loc.) 72 Image in MCF 73 Error Report (MCF)
80 Auto Tray Switch 81 Paper Size Check 82 LAN Print Timeout 83 IP Address
84 Subnet Mask 85 Default Gateway