Oki 5700 - Manual (Page 37)

English
Installation 3-9
Loading Paper
The standard paper tray can hold up to 250 sheets of standard-weight (75g/
m² – 20lb) paper. For best results, use paper specifically made for laser
printers or photocopiers. The machine is set for universal adjustment,
allowing the use of A4, letter or legal sized paper. The machine
automatically reduces the vertical length of received page images to fit on
the paper installed.
Notes:
1 Reduction down to 75% of the size of the original; e.g., if the
paper tray is loaded with A4 or letter-sized paper, a document
sent on legal paper will be reduced to fit on the paper loaded in
the machine.
2 Factory setting is for A4 paper. If another paper size will be used,
change the 1’ST PAPER SIZE setting of the user functions to
match the appropriate paper size.
1 Remove the paper tray from the machine.
2 Adjust the paper guides to the width of the paper to be loaded.
3 Lift up on the paper length adjustment guide and set it to the length of
the paper. (If using legal paper, fold down the extension at the rear of
the tray.)
4 Load the paper, face down, into the tray (up to 250 sheets).
5 Return the paper tray to its slot, and push it in gently but firmly until it
latches in place.
Note:
Be sure the paper fits under the tabs at both edges of the tray. Do not
fill past the Paper Full marker.