Tandberg Data 7000 - Manual (Page 26)

26
TANDBERG Videoconferencing System Getting started
Selecting / setting default network
To select a specific network, press ‘Net’ when you are in the dial menu.:
• Highlight the network to be used in your call.
• Press ‘Select’ to select network or press ‘Set as Default’ to set the selected network as your preferred choice
for this and all subsequent calls.
If ‘Auto’ is selected, the system will select a network based upon the following criteria:
• If an IP-address (e.g. 123*3*0*12 ) is entered, ‘LAN’ (H.323) is selected.
• If the first digits in the number match those set in ‘H.323 Prefix’ under ‘H.323 Settings’, ‘LAN’ is selected.
• In other cases, ‘ISDN’ (H.320) is selected*.
If you want to assign a specific prefix to the network selection or if you want to define your own network
configuration, see ‘Network Profiles’ in ‘Call Settings’, ‘Terminal Settings’.
* - ISDN indicates both ISDN-BRI, ISDN-PRI, Leased E1/T1 and External Networks.