Tandberg Data 7000 - Manual (Page 90)

90
TANDBERG Videoconferencing System Advanced use
Network Profiles
This menu defines the settings listed when pressing the Quick key ‘Net:’ while in the dial menu.
Encryption
Auto The system will try to make ISDN point-to-point calls using encryption. If the far end system supports
encryption, the call will be encrypted. If not, the call will proceed without encryption.
If the far end supports encryption, the systems will initiate encryption after the call is
connected. This takes approximately 10 seconds, during which an ‘open padlock’ will be
displayed. When encryption has been established, a ‘closed padlock’ symbol will be displayed.
Off The system will not send or receive encrypted data.
Technical encryption information like encryption algorithm and encryption check code can be found in the ‘Call
Status’ menu.
Max Call Length
This feature will automatically end both incoming and outgoing calls when the call time exceeds the ‘Max Call
Length’ specified.
Max Call Length can have the following values: 0-999(minutes), where 0 is Off.
A few minutes before the specified time is reached, a Quick-Key menu will appear. Users will be asked if he/
she wants to extend the ‘Max Call Length’ that is specified: