Tandberg Data 7000 - Manual (Page 87)

TANDBERG Videoconferencing System
87
Advanced use
IP Settings
IP-assignment
DHCP (Dynamic Host Configuration Protocol) can be selected when a DHCP server is present.
DHCP: IP-address, IP-subnet mask and Gateway are not used because these parameters are assigned by
the DHCP server.
Static: The codec’s IP-address and IP-subnet mask must be specified in the IP-address field.
IP-address
IP-address defines the network address of the codec. This address is only used in static mode. In DHCP-mode,
the assigned IP-address can be found on the Welcome Menu.
IP-subnet mask
IP-subnet mask defines the type of network. This address is only used in static mode. Your LAN-administrator will
provide the correct value for this field.
Gateway
When using DHCP, the default gateway will be set automatically. If the LAN utilizes static IP addresses, IP
address, subnet mask, and default gateway must be specified by the LAN administrator.
C HANGES IN THIS MENU WILL NOT HAVE
ANY EFFECT BEFORE THE SYSTEM IS
RESTARTED .
NOTE