Tandberg Data 7000 - Manual (Page 51)

TANDBERG Videoconferencing System
51
Advanced use
Duo Video Number*
Auto When adding Duo Video in a conference, Duo Video is connected automatically if supported by the far
end.
Manual When adding Duo Video in a conference and connected towards a system with no Duo Video
capabilities, enter the Duo Video Number into the ‘Number’ field in the ‘Add Duo Video’ menu. This can
be the number to another system (only video will be transmitted to the system receiving Duo Video).
Duo Video / Still Image source
Select which video source Duo Video transmits.
If you want the document camera to be the default source when using Duo Video / still images, select ‘Duo
Video / Still Image source: DocCam’.
To use the same video source as on the first connection for Duo Video / still images, select ‘Duo Video / Still
image source: Current’.
Auto-display still image
Select On to automatically display a received still image. If this selection is Off, you will have to press S ELFVIEW
to display a still image.
Still image filter
Select On to remove any instability in the high quality still image.
* - Requires option ‘Presenter’. To check which options are installed, see the ‘System Info’ menu in ‘Diagnostics’.