Tandberg Data 7000 - Manual (Page 69)

TANDBERG Videoconferencing System
69
Advanced use
Terminal Settings
This menu provides basic network setup for the unit and should be used when
installing the system.
Network Configuration
Before using the system it is necessary to specify which network to use and define its settings.
If you want to use your system via ISDN-BRI you should select ‘Current Network: ISDN-BRI’ and enter the
‘ISDN-BRI Settings’ menu to set the BRI parameters.
If you want to use your system via ISDN-PRI you should select ‘Current Network: ISDN-PRI’ and enter the
‘ISDN-PRI Settings’ menu to set the PRI parameters.
If you want to use special networks and connect using RS449, V.35, X.21 or connect to ISDN via an external
IMUX you should select ‘Current Network: External’ and enter the ‘External Network Settings’ menu to set
the External Network parameters.