Tandberg Data 7000 User Manual
Page 29
TANDBERG Videoconferencing System
29
General use
Add New Entry
When selecting ‘Add New Entry’, an empty directory entry is displayed:
1
Move to ‘Name’ and enter characters using the number keys on your remote control (as on mobile phones).
Use ‘0’ to enter ‘space’, use ‘#’ to switch between upper- and lower case.
2
Move to ‘Number’, key in the number and press OK. Specify only one number. If two numbers are required,
both numbers should be specified (2x64 or 2x56 calls).
3
Select ‘Quality’ to specify call rate to be used.
4
Select ‘Net’ to specify the network profile to be used. See ‘Selecting / setting default network’.
5
Select ‘Previous Menu’ to return to the Directory menu.
Delete Entry
When ‘Delete Entry’ is pressed, the selected entry is deleted.
Edit Entry
To edit an entry, highlight the entry you want to edit and press ‘Edit Entry’. Edit the entry and select ‘Previous
Menu’ to return to the Directory menu.
Delete Entry
To delete an entry, highlight the entry and press D
ELETE
.