Tandberg Data 7000 - Manual (Page 35)

TANDBERG Videoconferencing System
35
General use
Presets
The preset buttons enable you to pre-store up to ten different settings. Each preset is able to store:
• Video source
• Camera position, pan/tilt/zoom/focus/brightness (if Main Camera)
• Audio source selection (see ‘Audio Settings’ in ‘Advanced use’)
Selecting presets
To select a pre-stored camera position, audio and video source, use the keys P1 P2 P3 or
press P until the on-screen indicator ‘Preset 0-9’appears and use 0-9 to activate P0-P9
presets. To exit ‘Preset’ mode, press O
K .
P1-P3 are the same presets as when pressing P and then a number key 1-3.
Storing presets
To store the current camera position, audio and video source:
• Press S TORE once and wait for the on-screen indicator to appear.
• Then press one of the keys P1 P2 P3 or a number key 0-9.
store
P 1 P 2 P 3