Tandberg Data 7000 - Manual (Page 48)

48
TANDBERG Videoconferencing System Advanced use
Call quality
The Call Quality menu allows you to select the preferred quality of your call.
D UE TO ACTIONS OR LIMITATIONS AT THE FAR END YOU MAY NOT ALWAYS BE ABLE TO ACHIEVE THE SELECTIONS YOU WANT .
Audio
Auto Optimized audio quality depending on bandwidth.
High High audio quality (G722) regardless of bandwidth.
Normal Telephone quality (G728) regardless of bandwidth.
Video
Auto Will select ‘Motion’ or ‘Sharpness’ depending on selected video source**.
Motion Optimized for smooth motion video for all video inputs.
Sharpness Optimized for sharp video for all video inputs.
Natural Video
Auto Interlaced video capabilities (iCIF) will be transmitted and enabled.
Off Interlaced capabilities will not be transmitted. Useful if far end can not handle these capabilities.
VGA Resolutions
Auto VGA capabilities (VGA/SVGA) and SIF capabilities will be transmitted and enabled.
Off VGA capabilities will not be transmitted. Useful if far end can not handle these capabilities.
A UTO
1-4 CHANNELS : G722.1 IS SELECTED .
5-30
CHANNELS
: G722
IS SELECTED
.
TIP
NOTE
** - MainCam/Aux/VCR will select ‘Motion’. DocCam/PC will select ‘Sharpness’.
TIP SIF CAPABILITIES WILL ENABLE BETTER VIDEO QUALITY FOR NTSC SYSTEMS (SIF: 352 X 240, ISIF: 352 X 480, 4SIF: 704 X 480).