Leased e1/t1 settings – Tandberg Data 7000 User Manual
Page 79
TANDBERG Videoconferencing System
79
Advanced use
Leased E1/T1 Settings
Network Interface
Indicates if the network is of type E1 (30 channels) or T1 (24 channels). E1 will be default for PAL versions, T1
default for NTSC versions.
Max Channels
Indicates the maximum number of channels the codec is allowed to use on the E1/T1 interface. When E1 is
selected, maximum is 30 channels. When T1 is selected, maximum is 24 channels.
Start Channel
Indicates the first E1/T1 channel the codec is allowed to use. This setting might be used if the E1/T1 line is
shared with other equipment.
T1 Line Coding
Indicates how the signals on the line should be coded. If parts of the line between the systems use restricted
coding, this should be selected,
A
LL
SETTINGS
MUST
BE
IDENTICAL
ON
BOTH
SIDES
OF
THE
L
EASED
E1/T1
CONNECTION
.
Line Settings
This is the same menu as for ISDN-PRI. Please refer to section ‘ISDN-PRI Settings’.
NOTE