Tandberg Data 7000 - Manual (Page 41)

TANDBERG Videoconferencing System
41
General use
MultiSite cascading
By connecting four MultiSite systems together, it is possible to connect up to 10 video sites (including the four
MultiSite sites) plus 4 audio sites (telephones), see drawing below.
The host can connect up to 3 other video systems with MultiSite functionality. The host can use Voice Switched
or Continuous Presence mode.
The cascaded systems connect to two other video sites plus one audio site each. These systems will
automatically run Voice Switched mode and transmit a full screen image to the host when calling on ISDN. When
calling on IP, Voice Switched Mode must be selected manually.
Establishing MultiSite meetings using Directory
It is possible to pre-define meetings using Directory. All sites will then be connected automatically instead of
having to add one by one site.
• Press D
IRECTORY .
• Highlight a MultiSite entry and press C ONNECT .
See ‘Directory’ section for further information.
A
LL CONNECTIONS CAN BE ANY COMBINATION OF
ISDN/IP. NOTE