Tandberg Data 7000 - Manual (Page 84)

84
TANDBERG Videoconferencing System Advanced use
H.323 Settings
E.164 alias
This is the E.164 address of the codec. The E.164 address is equivalent to a telephone number, sometimes
combined with access codes. Valid characters are 0-9,* and #.
When using a gatekeeper the codec will send a message to the gatekeeper containing both the E.164 address
and the system name of the codec. The codec will not register with the gatekeeper if the E164 alias is not set.
Use Gatekeeper
Auto - The codec will automatically try to register on any available gatekeeper. If a gatekeeper responds to the
request sent from the codec within 30 seconds this specific gatekeeper will be used. If no gatekeeper responds,
the codec will not use a gatekeeper for making H.323 calls and hence an IP-address must be specified manually.
Manual - The codec will use a specific gatekeeper identified by ‘Gatekeeper IP-address’.
Off - The codec will not use a gatekeeper and an IP-address must be used in order to make an H.323 call.
Gatekeeper IP-address
This is the gatekeeper IP-address if you specify ‘Use Gatekeeper: Manual’.
H.323 Prefix
When dialing a number prefixed with digits specified by ‘H.323 Prefix’, and with ‘Net: Auto’, an H.323 call will be
placed. Example: H.323 Prefix is ‘555’. Dialling ‘55582’ with ‘Net:Auto’ will select LAN.
Register
Pressing ‘Register’ will send a gatekeeper registration request. This request will also be sent when leaving the
menu.