Call settings – Tandberg Data 7000 User Manual
Page 89
TANDBERG Videoconferencing System
89
Advanced use
Call Settings
Incoming MCU calls
On:
When you are in a call, the system will provide a visual/audio indication of an incoming call and
ask you to accept/reject the call.
Off:
The system will not accept incoming calls when you are in a call.
Incoming telephone calls
On:
The system will accept incoming telephone calls.
Off:
The system will not accept incoming telephone calls. This is useful to prevent incoming calls from
systems other than videoconferencing systems.
Fallback to telephony
On
Enables fallback from video calls to telephony/speech calls.
Off
Disables fallback.
Access Code
On
When pressing CONNECT or any number to make a call, an Access Code menu will be shown. The
user will then have to enter the correct Access Code in order to make a call.
Off
No Access Code is necessary to make a call.