Telex IP-223 - Manual (Page 102)

Setup Information
104
Patch Timeout Field
The Patch Timeout field identifies the amount of time, in seconds, allowed for inactivity on an active patch. If a patch is
inactive for the specified period of time, the patch is dropped.
The range for this field is 0 to 999seconds.
NOTE: Patch Timeout must be greater than Global Timeout.
Global Field
The Global field identifies the amount of time, in seconds, allowed for any patch.
The range for this field is 0 to 32000seconds.
Drop All Field
The Drop All field identifies the DTMF digit sequence used to drop all current patches. The number entered must be the
number of digits specified in the Dialing Digits field.
The range for this field is 0 to 9999seconds.
RCP Tables
The required fields depend on the mode selected:
XPATCH - requires #1 or #2, IP Address, Add String and Delete String
DIAL - requires Phone, Add String and Delete String
DLVOIP - requires Rx Multicast/Port, Tx Multicast/Port, Add String and Delete String
PHONEP - requires Add String and Delete String
LPTCH - requires Add String and Delete String
Jump To Entry Drop Down Menu and Go Button
The Jump To Entry drop down menu allows you to select (in groups of (10)) function tones to view and modify.
1. From the Jump To drop down menu, select the entries you want to view.
2. Click the GO button.
The function tones you select appears.
Entry Field
The Entry field labels the row for the crosspatch entry.
Add String Field
The Add String field identifies the DTMF digit sequence to add this crosspatch entry. The number entered must be the
number of digits specified in the Dialing Digits field.
This field can contain up to 4 digits.
RCP Tables