Telex IP-223 User Manual
Page 33
Advertising
35
Setting the IP Address Information
8.
From the Flow Control drop down menu, select None
NOTE: These parameters may be different than the defaults depending on the selected Serial Port Parameters, see
“Serial Port Parameters Drop Down Menu” on page 73.
9.
Click OK.
The Main HyperTerminal window appears.
10.
In the main HyperTerminal window, enter an uppercase
S.
Drop down menu
Default
Setting
Bits per second field:
19200
Data bits field:
8
Parity field:
None
Stop bits field:
1
Flow control field:
None
FIGURE 85.
Com Terminal Setup Windows
Advertising