Telex IP-223 - Manual (Page 104)

Setup Information
106
IP Address Field (XPATCH option only)
The IP Address field identifies the IP Address of the remote IP-223 with a radio used in this crosspatch entry.
Rx Multicast Field (DLVOIP option only)
The Rx Multicast field identifies the broadcast address for the RX audio traffic used in this crosspatch entry. To inter-operate,
all consoles must have the same base Multicast Address.
The range for this field is 224.0.0.2 to 239.255.255.255.
Rx Port Field (DLVOIP option only)
The Rx Port field identifies the RX port number for this crosspatch entry.
The RX port number must be unique and must be greater than 1054.
Tx Multicast Field (DLVOIP option only)
The Tx Multicast field identifies the broadcast address for the TX audio traffic used in this crosspatch entry. To inter-operate,
all consoles must have the same base Multicast Address.
The range for this field is 224.0.0.2 to 239.255.255.255.
Tx Port Field (DLVOIP option only)
The Tx Port field identifies the TX port number for this crosspatch entry.
The TX port number must be unique and must be greater than 1054.
Command Buttons
NOTE: If any changes have been made to the entries on the window, the Submit button must be selected before selection
of any other command button on the window. If the Submit button is not selected before the selection of another
command button, any changes made to the entries on the window are cleared.
Prev 10 Button
The Prev 10 button is used to traverse the window between crosspatch entries 1 and 100.
FIGURE 130. #1 or #2 Drop Down Menu-Crosspatch Setup