Telex IP-223 - Manual (Page 47)

49
Multicast Address Setup Window
Multicast Address Setup Window
The Multicast Address Setup window identifies the mode of operation or line type, as well as which port the IP-223 uses to
communicate various line information on. Once a selection is made in the line type field, the fields necessary to enter the setup
information for the selected line type are enabled. The fields on this window are described on the following pages.
NAVIGATION: Clicking Multicast Address Setup displays the Multicast Port Number Setup window, shown in Figure 93.
Line Number Field
The Line Number field displays the appropriate line number for the specified parameters.
Enable via Ethernet Check Box
The Enable via Ethernet check box indicates whether or not Ethernet connectivity is used for the line number. If selected,
Ethernet connectivity is ON. Otherwise, audio received from the analog connections of the IP-223 are not echoed to the
Ethernet, and Ethernet traffic is not mixed into the audio of the IP-223.
FIGURE 93. Multicast Address Setup
Line Multicast Setup