Telex IP-223 - Manual (Page 63)

65
Per Line Setup Window—Local, Tone, and Console Mode Configuration
The Signaling Setup section is used to setup encode, decode, tone type and digits pause and duration.
IMPORTANT: The FleetSync features in this section are optional IP-223 accessories. See “IP-223 Accessories” on
page 15 for part numbers.
FleetSync Decode Check Box (Tone and Local Modes)
The FleetSync Decode check box is used to enable the line for radio IDs with FleetSync ANI capabilities to decode their alias,
ID numbers, and messages on Telex consoles within the system. If selected, Kenwood FleetSync's over-the-air ANI is enabled
and the ANI number or name is decoded via the ANI lookup tables and displayed on Telex IP based consoles.
FIGURE 102. Per Line Setup - Local, Tone, and Console Mode (view 3)
Signaling Setup