Telex IP-223 - Manual (Page 107)

109
CRP PIN Table Window
Jump To Entry Drop Down Menu and Go Button
The Jump To Entry drop down menu allows you to select (in groups of 30) function tones to view and modify.
1. From the Jump To drop down menu, select the entries you want to view.
2. Click GO.
The function tones you select appears.
Submit Button
The Submit button is used to upload changes to the IP-223.
IMPORTANT: The submit button saves changes in temporary memory only.
To permanently save changes, do the following:
1. Click Submit.
The changes are sent to the IP-223 in temporary storage.
2. Click Save to EEPROM.
The Save to EEPROM window opens.
3. Click Save Parameters.
Changes are now permanently saved to the IP-223 console.
PIN Enable Check Box
The PIN Enable check box indicates whether or not a PIN number is required to create a crosspatch. If selected, a PIN number
is required to create a crosspatch.
Entry Field
The Entry field allows for 300 PIN numbers.
PIN Field
The PIN field identifies the PIN for the displayed crosspatch entry number.
The range for this field is a 4-digit PIN.
Submit Button
The Submit button, located at the bottom of each configuration window, is used to upload changes to the IP-223.
IMPORTANT: The Submit button saves changes in temporary memory only.
PIN Setup