Telex IP-223 - Manual (Page 43)

45
Basic Ethernet Setup Window
QOS: D, T, and R (Delay, Throughput, and Reliability) Bits Field
The QOS: D, T and R Bits field is used for advanced programming purposes. These bits are usually 0. Contact your network
administrator to obtain the appropriate value for this field.
Delay (D) an active delay bit tells the router to choose a high speed to minimize delay
Throughput (T) an active throughput bit specifies high capacity links should be used.
Routing (R) an active routing bit directs routing protocols and network management applications to select
fault-tolerant paths.
For more information on the binary equivalent for delay, throughput, and reliability see Table 6 on page 45.
The range for this field is 0 to 7.
Local Computer IP Address 1-10 Fields
The Local Computer IP Address fields identify the base IP Address of up to 10 IP-223 units within the same room. These
fields are generally used when the selected line mode is console. The entries are used for the Ethernet crossmute function. The
IP-223 examines the source of the audio and flags it if the source from one of the IP-223 units listed in these fields.
TABLE 6. D, T, R Binary Reference
Precedence Field D, T, and R bits
Binary Traffic Type Binary
0 0 0 (0) Best Effort D T R
0 0 1 (1) Background 0 0 0 (0) Normal (Best Effort), minimal cost
0 1 0 (2) Standard 0 0 1 (1) Maximize Reliability
0 1 1 (3) Excellent Load 0 1 0 (2) Maximize Throughput
1 0 0 (4) Controlled Load 1 0 0 (4) Minimize Delay
1 0 1 (5) Video
1 1 0 (6) Voice
1 1 1 (7) Network Control
Local Console IP Address