Crp pin table window, Figure 56. remote crosspatch pin – Telex IP-223 User Manual
Page 106
Setup Information
108
25.
Click Next 10 to toggle to the next Crosspatch Setup window.
26.
Complete steps 13 through 22 for all desired crosspatch entries on the window.
27.
After all crosspatches have been entered, click Submit.
The entries currently displayed on the window are sent to the IP-223 for storage.
28.
From the links, select Save to EEPROM.
The Save Setup Parameters window appears.
29.
Click Save Parameters.
The entries are saved to permanent memory.
CRP PIN Table Window
The Remote CrossPatch Pin Setup window allows up 300 PIN numbers to be set for operation of the IP-223’s crosspatch
feature. The fields on this window are described on the following pages.
NAVIGATION: Clicking CRP PIN Table displays the Remote Crosspatch Pin Setup window shown in Figure 131.
When PIN numbers are entered correctly, a Go-Ahead Beep sequence to indicate success or failure is played back on the
console indicating RCP setup is ready.
NOTE:
The Interdigit Time field entry on the Crosspatch Setup window also applies to PIN entry.
FIGURE 131.
Remote Crosspatch Pin