Telex IP-223 - Manual (Page 40)

Setup Information
42
Welcome Window
The Welcome window provides a basic description of the IP-223 operating modes and a field to enter a descriptive name for
the unit. This name is displays at the top of each IP-223 web setup window
NAVIGATION: Clicking the picture of the IP-223 on the links displays the Welcome window, shown in Figure 90.
To change the name of the IP-223 unit, do the following:
1. In the Console Name field, enter the desired name (up to 12 characters).
2. Click Submit.
The name appears at the top of the setup window.
3. From the links, select Save to EEPROM.
The Save Setup Parameters window appears.
4. Click Save Parameters.
The changes made are saved to permanent memory.
FIGURE 90. Welcome Window