Telex IP-223 - Manual (Page 66)

Setup Information
68
ANI Call Type Drop Down Menu
The ANI Call Type drop down menu, shown in Figure 104, identifies the type of call for the ANI Decoder #.
Available selections for this field are: Emergency, Group, Individual, or Status.
ANI Call Format Field
The ANI Call Format field identifies the call string format for the ANI Decoder #. The format is a free form string entry of up
to 16 digits. These include digits 0 - 9, A-D (A-F for other formats), *, # and the following characters:
I (Caller ID) – Placed into the ID field of the ANI packet or the ANI field of the caller portion of the telegram. The ID is
stored as a 32-digit string in the packet.
G (Group Digits) – Stored in the Group section of the ANI packet. The group value is converted to a decimal number and
is stored as an 8-digit string in the packet.
S (Status) – Digits represented by S are interpreted as status information. These values are converted to decimal numbers
and stored as an 8-digit status string in the ANI packet. The console has a corresponding list of the status numbers and
descriptions that are displayed upon receipt of the packet.
P (Pause) – When inserted into the string, a pause is expected in this location. The pause duration is set in the Pause
Duration field (see “Pause Duration Field” on page 67).
R (Calling ID) – Used to delineate the location of the digits being used for a selective call. These digits represent the
address or ID of the person being called. They are stored in the ANI packet as an 8-digit string.
FIGURE 104. ANI Call Type Drop Down Menu-Per Line Setup