Telex IP-223 - Manual (Page 53)

55
Per Line Setup Window
To permanently save changes, do the following:
1. Click Submit.
The changes are sent to the IP-223 in temporary storage.
2. Click Save to EEPROM.
The Save to EEPROM window opens.
3. Click Save Parameters.
Changes are now permanently saved to the IP-223 console
Per Line Setup Window
The Per Line Setup window identifies the parameters for the line type selected for the line on the Multicast Port Number
Setup window. The line number to which the details on the window apply is displayed at the top of the window. The line type
selected determines the window display and enables the appropriate fields on the window necessary to enter the setup
information for the line type.
NOTE: Clicking Per Line Setup displays the Per Line Setup window, shown in Figure 97.