Tyco 4100U-S1 - Manual (Page 17)

1-3
This section lists the parts that are supported by the 4100U-S1 Fire Alarm System.
The following is a list of assemblies, cards and modules used in 4100U-S1:
These parts are included in the base 4100U-S1:
•
742-516 CPU Motherboard (566-227)
•
4100-7151 CPU Card (566-149)
•
4100-9848AU System Power Supply, Australian version
•
4100-6033 Alarm Relay Card (566-058) plugged onto the SPS and used
to supply the Brigade I/F relays.
•
PA0915 Fuse Distribution Board, connected to the Auxiliary Power
terminals of the System Power Supply
•
4100-2300 Expansion Bay Assembly (includes the metalwork with the
PDI back-plane)
•
4100-1288 64 LED/64 Switch Controller module with mounting plate
•
4100-1282 8 SW/16 LED red/yellow module (2 off)
These parts may be used to expand a 4100U-S1:
•
4100-1282 8 SW/16 LED red/yellow module
•
4100-3101AU IDNET Module – 250 point capacity
•
4100-1289 64 LED/64 Switch Controller module
•
4100-1287 24 Switch/24 red LED module
•
4100-1284 8 Switch 16 red/green LED module
•
4100-1281 8 Switch 8 yellow LED module
•
4100-0160 Internet Interface Module (566-355).
•
ME0456 Fan Control Module
The following kits are available to install in a base 4100U-S1:
Brigade Interfaces
•
FP0935 ASE Door Kit (ASE not included)
•
FP0937 PPU/AIU Door Kit (PPU/AIU not included)
Other
•
4100-KT0448 Fused DC Distribution Bd, XSPS AU Mounting
•
4100-KT0468 4100 Motherboard to 4100U Bay, Mounting Kit
•
4100-0766K T-Gen 50 and 4100U Mounting Bracket Kit
•
ME0460 T-Gen 50 Evacuation Control Switch and Label
•
ME0490 T-Gen 50/4100U Dynamic Microphone and lead
Continued on next page
4100U-S1 Part Codes
Overview
Assemblies, Cards &
& Modules
Kits