Tunturi J7F User Manual

Page 5

Advertising
background image

5

FINISHING AN EXERCISE SESSION

Never leave the safety tether key in the treadmill.

Use the main power switch to turn the unit off.

Unplug the electrical cord from the wall outlet

and from the treadmill.

If necessary clean the treadmill from sweat with

a damp cloth. Do not use solvents.

Store the electrical cord where it is clear from

all pathways and out of children’s reach.

HOW TO MOTIVATE YOURSELF

TO CONTINUE

In order to reach the goals you have set, you’ll need

to keep finding the motivation to continue so you

achieve your ultimate goal: life-long health and a

new quality of living.

Set yourself realistic targets.

Progress step-by-step according to your schedule.

Keep a fitness diary and write down your progress.

Change your way of exercising from time to time.

Use your imagination.

Learn self-discipline.

One important aspect of your training is versatility.

Varying your training exercises different muscle

groups and helps maintain motivation.

I N T E R F A C E

FUNCTION KEYS

Manual is the default basic exercise mode when

the device is switched on. In Manual mode you

control the treadmill yourself.

Control offers three different standard heart-

rate exercises.

Prog provides a fitness test and 4 pre-

programmed exercise profiles.

PSC allows you to adjust treadmill speed by

changing your position on the track.

Set helps you define user weight, heart-rate

alarm limits, audio signal use and units of

measurement.

Reset is the key to reset time, distance and

energy consumption displays for all exercises.

CUSTOM START

In Manual mode, use Custom Start to begin an

exercise where speed and elevation are preset by

the user. You can save the Custom Start values by

setting the desired speed and elevation, and then

pressing the Custom Start key for 2 seconds: an

audio signal indicates that the setting is saved. For

user safety, the speed range on the key is 0,5-10

km/h (0,3-6,2 mph).

SETTING KEYS, OK AND SCAN/HOLD

Setting keys are used to set the values on-screen.

The right arrow key is used for navigation, while

the up/down keys are used to set values.

The

OK

key in the middle of the setting keys is

used to confirm your selections.

The values displayed change at 6-second

intervals. If you want to monitor any value for a

longer period, press the

SCAN/HOLD

key, and the

display will be locked. When you want to view the

changing values again, press the

SCAN/HOLD

key

to unlock.

SPEED CONTROL KEYS

Speed control keys (Tortoise/Hare) are located

below the display. Hare key increases the belt

speed in 0,1 km/h (or 0,1 mph) increments, the

tortoise key decreases it in 0,1 km/h (or 0,1 mph)

increments. Pressing these keys longer makes the

speed change faster. Track speed ranges from 0,5-16

km/h (0,3-10 mph). In some profiles you can

replace these keys with the

PSC

feature.

ELEVATION CONTROL KEYS

Click the elevation up key to increase elevation

in 1% increments, and the elevation down key

to decrease it in 1% increments. Track elevation

ranges from 0 % (horizontal) to 10 %. Track

elevation ranges from 0 % (horizontal) to 10 %.

STOP

Press

STOP

to end your exercise. Press

STOP

once

in exercise profile training and the treadmill stops

and moves into its waiting state for 5 minutes. You

can restart the interrupted exercise by pressing the

Hare key within 5 minutes. Press

STOP

twice to

end your exercise.

SET AND RESET

In Set you can define user weight, heart-rate alarm

limits, audio signal use and units of measurement

as follows:

1.

Press the Set key.

Setting Set 1 (user weight) is displayed. Set

the required value in the central display with the

up/down setting. Press

OK

to confirm your choice;

that will also always move you forward to setting

the next value.

Setting Set 2 (minimum heart-rate value) is

displayed. Set the desired value in the central

display with the up/down setting keys. In standard

heart-rate exercises, your heart rate will then be

kept above the limit you set. Press

OK

to confirm

your choice.

Setting Set 3 (maximum heart-rate value) is

displayed. Set the desired value in the central

display with the up/down setting keys. In standard

heart-rate exercises, your heart rate will then be

kept below the limit you set. Press

OK

to confirm

your choice.

Setting Set 4 (audio signal use) is displayed.

AUd

ON

” indicates the audio signal is on and “

AUd

OFF

” that it’s off. Use the up/down setting keys to

O W N E R ' S M A N U A L • J 7 • J 7 F

G B

Advertising