Texas Instruments TMS320C2XX - Manual (Page 193)

BACC Branch to Location Specified by Accumulator
7-40
Syntax BACC
Operands None
Opcode 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
0 0 0 0 0 1 0 0 0 1 1 1 1 1 0 1
Execution ACC(15:0)
→
PC
Status Bits None
Description Control is passed to the 16-bit address residing in the lower half of the accumu-
lator.
Words 1
Cycles for a Single BACC Instruction
ROM DARAM SARAM External
4 4 4 4+3p
Note: When this instruction reaches the execute phase of the pipeline, two additional instruc-
tion words have entered the pipeline. When the PC discontinuity is taken, these two
instruction words are discarded.
Example BACC ;(ACC contains the value 191)
The value 191 is loaded into the program counter, and the program continues
to execute from that location.
Cycles