Teledyne 6712SR - Manual (Page 43)

3-1
6712SR Refrigerated Sampler
Section 3 Getting Started
Before programming the 6712SR, you should become familiar
with its keys and how to use the screens.
The 6712SR Sampler has two sets of programming modes. The
first mode, Standard Programming, lets you set up typical
sampling programs easily and efficiently. The second mode,
Extended Programming, lets you create sophisticated pro-
grams for complex sampling applications.
All of the sampling features available in standard programming
mode are available in extended programming mode. However,
extended programming provides many additional features.
Standard and extended programming features are explained in
separate sections. This section focuses on some basic features
that are common to both programming modes, such as using the
menus and setting the clock.
3.1 Initial Operation
Turn the sampler on by pressing the On/Off key. It is labeled with
this icon:
. The start-up screen appears first.
It remains on the display for about eight seconds or until you
press a key. It tells you the type of programming screens the
sampler is currently using — standard or extended — and gives
you a tip about the on-line help. The main menu screen, shown
below, appears next.
(If a module is attached, a different screen may appear first. See
the module manual for more information.)
The sampler is programmed at the factory so that the standard
programming screens appear when you first turn the sampler on.
You can switch between programming modes by typing in a
numerical command at the main menu:
• At the main menu type 6712.2 to show the extended
programming screens.
• At the main menu type 6712.1 to show the standard
programming screens.
6712 SAMPLER
STANDARD PROGRAMMING
For HELP at any
screen press ? key.
RUN
PROGRAM
VIEW REPORT
OTHER FUNCTIONS
6712 Front Panel