Teledyne 6712SR - Manual (Page 55)

4-1
6712SR Refrigerated Sampler
Section 4 Standard Programming
The 6712SR Sampler has two sets of programming screens. The
first set, called standard programming screens, lets you set up
typical sampling programs easily and efficiently. The second set,
extended programming screens, lets you create sophisticated
programs for complex sampling applications.
All of the sampling features available within the standard pro-
gramming screens are available in extended programming.
However, extended programming provides several additional fea-
tures which are discussed in the next section. Menu flowcharts
for both sets of programming screens are in Appendix A.
4.1 Switching Between
Standard and
Extended Modes
Factory default settings cause the sampler to begin in standard
programming mode the first time you turn it on. The start-up
screen tells you which programming mode the sampler is cur-
rently using. You can switch between programming modes by
entering a numerical command at the main menu:
• At the main menu, type 6712.1 to enter standard
programming mode.
• At the main menu, type 6712.2 to enter extended
programming mode.
4.2 Language Selection,
Units of Length
You have the option of displaying screens in English or Spanish
(or possibly another language). The default is English. At the
main menu, type 6712.8 to display:
Use the arrow key to move between the two choices. When the
desired choice is blinking, press
↵.
If you select the English option, you will advance to a second
screen that asks you to select your units of length:
RUN
PROGRAM
VIEW REPORT
OTHER FUNCTIONS
Main Menu
ENGLISH
SPANISH
SELECT UNITS FOR
LENGTH:
ft m